Epson 7800/9800/7880/9880 Head Repalcement

The below information is part of series of information to help you maintain your own printer. If you need further help you can contact us directly. We will supply you with all the parts necessary to keep your printer in top shape. This includes heads and related parts with the information needed to code the head. If you have any information to add to our guides, please contact us we would greatly appreciate any added valuable information.

Replacing an Epson 9800 or 9880 head can be accomplished fairly easily. Just follow these steps.
For a replacement head call our order department as listed on the left side of this page.

Head Replacement Procedure:

First unplug the printer.

Remove the cove as shown below so you can move the head in the middle of the printer and work comfortably.

Move the carriage out to the middle of the printer and place a 81/2 x 11 inch sheet of pape to catch the screws that may fall.
To remove the head, follow the next set of steps. Remove the following screws as shown below.
Now Remove the two screws from the metal tension bar and carefully remove the screw from the grounding bracket. Below the diagram shows youhow to remove the carriage.
When removing or replacing the head be careful not to bend the cable.
When placing the print head cable into the the slot, be very careful not to bend the cable and short out the head. It just takes a little care.
When replacing the head, reverse the opperation.

Epson 7800/9800/7880/9880 Head Repalcement is fairly easy when following our guide.

WELCOME TO THE WORLD
 OF DIGITAL 
I NKJET COLOR PRINTING TECHNOLOGY

Americaninkjetsystems

We Accept

Contact us
American Inkjet Systems, Inc.
32 Broadway
Hillsdale NJ 07642

Tel: 201 753-4600
Tel: 201 753-4601
Tel: 201 263-9177

Fax: 201 383-0120

Background History

Emails
For orders
  aicorder@americaninkjetsystems.com

For Tech help
 Doccolor1@aictech.us

 For Ink help:
 Symphonicink@aictech.us

For Equipment Info
 info@aictech.us

Request for Sample Prints
 Samples@americaninkjetsystems.com